HOW TO: Veritical Door install - Club4G Forum : Mitsubishi Eclipse 4G Forums

Bart-man · June 27th, 2007, 10:40 AM

This page is dedicated to the Vertical doors that will be installed. I just received them in the mail here are a couple of pics

This is the box that it was shipped in

Packrat007's 2006 Mitsubishi Eclipse Picture 11

expand

This is just opening the box

Packrat007's 2006 Mitsubishi Eclipse Picture 9

expand

Moved out the Hydrolics (spelling is probably not right)

Packrat007's 2006 Mitsubishi Eclipse Picture 10

expand

and this is a close up of the Hydrolics

Packrat007's 2006 Mitsubishi Eclipse Picture 8

expand

well it took about 6 hours total and here is some pics of install.

From this point you can see where we removed the fender and decided to cut a little area behind it to make the hindge fit better.

Packrat007's 2006 Mitsubishi Eclipse Picture 12

expand

Hindge installed

Packrat007's 2006 Mitsubishi Eclipse Picture 13

expand

Hindge installed and door up

Packrat007's 2006 Mitsubishi Eclipse Picture 14

expand

Final pick with fender off and hindge on and door up

Packrat007's 2006 Mitsubishi Eclipse Picture 15

final results

Bart-man · June 27th, 2007, 10:41 AM

finally a video of how it opens and closes

*note the sound you hear at the end is not the door closing but the guy next to me reving his engine*

*Original post by Slacker*

Mauricio · June 27th, 2007, 11:15 AM

they only open that much?? oohh and do you really have to cut that piece off the fender cuz i tought vertical doors inc. were completly bolt on? but otherwise nice looking car and gotta love the doors now go and win some shows with them doors.

JSRIDE · June 27th, 2007, 11:58 AM

i think you have to shave a lil bit of the inner part if the fenders. How much does the kit cost?????

NotUrAvg4G · June 27th, 2007, 12:12 PM

about $1000. im 6'6 so there is no way in hell i could get in and out of that car

darb454 · November 4th, 2007, 06:47 AM

where did u get $1000 from? i checked the sit and lists at $1800 anyone else know where u can get the same bolt on kit but save some $$, and when u installed the kit did u have to extend any of the wires for the door? how well do the shocks suport the dorr i know some kits they are week and heavy wind will through them around

slacker · April 29th, 2008, 01:03 PM

Quote:

Originally Posted by Mauricio

they only open that much?? oohh and do you really have to cut that piece off the fender cuz i tought vertical doors inc. were completly bolt on? but otherwise nice looking car and gotta love the doors now go and win some shows with them doors.

wow i didnt know my how to made it here.

they only open that much and the fender you have to roll in cause when it goes up it will rub on the arm of the car. the other part where i cut out a piece was just my oppinion to do to make it flush with the mounting area. you dont have to do it i just thought it would be better.

slacker · April 29th, 2008, 01:08 PM

Quote:

Originally Posted by NotUrAvg4G

about $1000. im 6'6 so there is no way in hell i could get in and out of that car

i have friends that are 6'3 and i dont have to open them up for them to get in.

Quote:

Originally Posted by darb454

where did u get $1000 from? i checked the sit and lists at $1800 anyone else know where u can get the same bolt on kit but save some $$, and when u installed the kit did u have to extend any of the wires for the door? how well do the shocks suport the dorr i know some kits they are week and heavy wind will through them around

there are ways to get the kit cheaper but people will bash me probably for that so if you would like to know let me know. also the shocks hold up pretty good only have problems with them in really cold weather they tend to fall down a little. and they do move in heavy wind but i just dont open them up and get in like normal.

doll05360 · October 30th, 2008, 01:17 PM

nice, im def installin those

sboarder97km · March 11th, 2009, 11:08 AM

Do you have to extend any wires?? Im about to purchase a kit, and think I can do it myself but I dont know about the extension of wires. Can anyone help me please?!

darb454 · March 11th, 2009, 11:27 AM

apparantly you dont from what ive read you dont need to do any cutting might need to pull a bit of slack out and replace the rubber hose with wire loom. im waiting till its a bit warmer out to install my kit

sboarder97km · March 11th, 2009, 01:27 PM

It doesnt seem too difficult if you dont need to extend the wires.

darb454 · March 11th, 2009, 06:13 PM

how so?

MannyGT · March 12th, 2009, 06:12 PM

OK what the hell happened to wat I wrote o_O. Oh I know, I was making critisicm of the forum. thats why. Oh well, I guesss ppl have to find the true some how

ALBOE · March 14th, 2009, 11:01 PM

Quote:

Originally Posted by MannyGT

OK what the hell happened to wat I wrote o_O. Oh I know, I was making critisicm of the forum. thats why. Oh well, I guesss ppl have to find the true some how

what's the true?

Justin · March 14th, 2009, 11:26 PM

Quote:

Originally Posted by MannyGT

OK what the hell happened to wat I wrote o_O. Oh I know, I was making critisicm of the forum. thats why. Oh well, I guesss ppl have to find the true some how

I deleted it because what jim said was un nessicary 2 the thread and you quoted his post so it was deleted too.

June 27th, 2007, 10:40 AM	#1 (permalink)
Bart-man IH8Civix Join Date: Apr 2007 Location: Toronto, Canada. Vehicle: 06 Audi A4 2.0T Posts: 700 Rep Power: 5	HOW TO: Veritical Door install This page is dedicated to the Vertical doors that will be installed. I just received them in the mail here are a couple of pics This is the box that it was shipped in expand This is just opening the box expand Moved out the Hydrolics (spelling is probably not right) expand and this is a close up of the Hydrolics expand well it took about 6 hours total and here is some pics of install. From this point you can see where we removed the fender and decided to cut a little area behind it to make the hindge fit better. expand Hindge installed expand Hindge installed and door up expand Final pick with fender off and hindge on and door up expand final results expand expand expand expand expand expand expand __________________ 2006 Audi A4 quattro.

June 27th, 2007, 10:41 AM	#2 (permalink)
Bart-man IH8Civix Join Date: Apr 2007 Location: Toronto, Canada. Vehicle: 06 Audi A4 2.0T Posts: 700 Rep Power: 5	finally a video of how it opens and closes note the sound you hear at the end is not the door closing but the guy next to me reving his engine Original post by Slacker __________________ 2006 Audi A4 quattro.

June 27th, 2007, 11:15 AM	#3 (permalink)
Mauricio Senior Member Join Date: Jun 2007 Location: Miami, FL Vehicle: 2006 Eclipse GT Posts: 409 Rep Power: 4	they only open that much?? oohh and do you really have to cut that piece off the fender cuz i tought vertical doors inc. were completly bolt on? but otherwise nice looking car and gotta love the doors now go and win some shows with them doors. Last edited by Mauricio; June 27th, 2007 at 11:17 AM.

June 27th, 2007, 12:12 PM	#5 (permalink)
NotUrAvg4G Senior Member Join Date: Feb 2007 Location: SC and KY Posts: 2,116 Rep Power: 9	about $1000. im 6'6 so there is no way in hell i could get in and out of that car __________________ OMG...NO...not a....CIVIC http://i4.photobucket.com/albums/y13...b663cdwp51.gif

November 4th, 2007, 06:47 AM	#6 (permalink)
darb454 Senior Member Join Date: Jul 2007 Location: eastern ontario Vehicle: 06 GT eclipse Posts: 790 Rep Power: 4	where did u get $1000 from? i checked the sit and lists at $1800 anyone else know where u can get the same bolt on kit but save some $$, and when u installed the kit did u have to extend any of the wires for the door? how well do the shocks suport the dorr i know some kits they are week and heavy wind will through them around __________________ mods: brianJ harness,AEM FIC, hps CAI, 3" magnaflow exhaust, outlaw intake spacers, 3rd cat delete,TB bypass,upgraded grounds,glowshift pod/guages, AEM eugo, tanabe strut bar, ingalls ETD, MR lowering springs, RSK knob, vison eyelids,OEM fangs,8k HID headlights/fogs, Zinik rims, falken tires, 5% tint, 4 x 8" DD subs 4000watt amp, ralco short shifter, motor mount kit, Proflow TB

		Club4G Forum : Mitsubishi Eclipse 4G Forums - 2006+ Eclipse Authority > Performance and Technical > HowTo > Show Tech
HOW TO: Veritical Door install

June 27th, 2007, 11:58 AM	#4 (permalink)
JSRIDE Member Join Date: May 2007 Location: Ellsworth, Maine Vehicle: 2006 eclipse gt Posts: 90 Rep Power: 4	i think you have to shave a lil bit of the inner part if the fenders. How much does the kit cost?????

October 30th, 2008, 01:17 PM	#9 (permalink)
doll05360 Got Torque? Name: Ryan Doll Join Date: Oct 2008 Location: Wisco Vehicle: '06 sunset GT-MR Posts: 91 Rep Power: 2	nice, im def installin those __________________ It's not "cheater juice" its "boost in a bottle" Got Torque? 354.0whp 432.5ft-lbs I eat slow-vics for breakfast

March 11th, 2009, 11:08 AM	#10 (permalink)
sboarder97km Senior Member Join Date: Nov 2008 Vehicle: 2006/Eclipse/GT Posts: 506 Rep Power: 2	Do you have to extend any wires?? Im about to purchase a kit, and think I can do it myself but I dont know about the extension of wires. Can anyone help me please?!

March 11th, 2009, 11:27 AM	#11 (permalink)
darb454 Senior Member Join Date: Jul 2007 Location: eastern ontario Vehicle: 06 GT eclipse Posts: 790 Rep Power: 4	apparantly you dont from what ive read you dont need to do any cutting might need to pull a bit of slack out and replace the rubber hose with wire loom. im waiting till its a bit warmer out to install my kit __________________ mods: brianJ harness,AEM FIC, hps CAI, 3" magnaflow exhaust, outlaw intake spacers, 3rd cat delete,TB bypass,upgraded grounds,glowshift pod/guages, AEM eugo, tanabe strut bar, ingalls ETD, MR lowering springs, RSK knob, vison eyelids,OEM fangs,8k HID headlights/fogs, Zinik rims, falken tires, 5% tint, 4 x 8" DD subs 4000watt amp, ralco short shifter, motor mount kit, Proflow TB

March 11th, 2009, 01:27 PM	#12 (permalink)
sboarder97km Senior Member Join Date: Nov 2008 Vehicle: 2006/Eclipse/GT Posts: 506 Rep Power: 2	It doesnt seem too difficult if you dont need to extend the wires.

March 11th, 2009, 06:13 PM	#13 (permalink)
darb454 Senior Member Join Date: Jul 2007 Location: eastern ontario Vehicle: 06 GT eclipse Posts: 790 Rep Power: 4	how so? __________________ mods: brianJ harness,AEM FIC, hps CAI, 3" magnaflow exhaust, outlaw intake spacers, 3rd cat delete,TB bypass,upgraded grounds,glowshift pod/guages, AEM eugo, tanabe strut bar, ingalls ETD, MR lowering springs, RSK knob, vison eyelids,OEM fangs,8k HID headlights/fogs, Zinik rims, falken tires, 5% tint, 4 x 8" DD subs 4000watt amp, ralco short shifter, motor mount kit, Proflow TB

March 12th, 2009, 06:12 PM	#14 (permalink)
MannyGT Droganto Join Date: Mar 2007 Location: Winter Park, FL Vehicle: 2006/Eclipse/GT Posts: 2,263 Rep Power: 6	OK what the hell happened to wat I wrote o_O. Oh I know, I was making critisicm of the forum. thats why. Oh well, I guesss ppl have to find the true some how __________________ Master Degree in Dealership Customer Relationship (AKA Dealer BS) Automotive Event Forum - XECOFL.com - http://xecofl.com/forum/index.php?ac...r;referredby=1

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode